Vac-A-Sample®
The Gamet Manufacturing Vac-A-Sample® is a manually inserted pneumatic sampling probe capable of sampling to depths of 60 or more feet. This product is ideally suited for use in obtaining samples from enclosed bins and ground piles. The use of this sampler eliminates unnecessary shifting and turning of stored grain. It utilizes an explosion proof electric vacuum motor and switch assembly to draw samples from various depths into a portable cyclone assembly. Tip sections are available in three styles; course, fine and burr to meet all application needs.
Features:
- 110 and 220 volt models
- Tip sections for both fine and coarse grain products
- Explosion Proof on-off switch assembly
- 7/8 HP vacuum motor assembly
- Explosion proof cord connector
- 10’, 20’, 30’ and 50’ hose lengths
B-310 (Temporarily Out of Production)
The Gamet model B-310 sampler is ideal for use in quality control and bagging operations. This unit is available in pneumatic and electrically operated versions. The sample probe is constructed of 2” diameter stainless steel tube and can be actuated to penetrate the product flow from 4-10”. This device can be used to sample grain, meal, powders, pellets and other dry bulk aggregate materials up to 1/2” in diameter. Sample frequency is easily adjusted with both the sample time and the time the probe stays out of the product flow controlled independently.
Features:
- 6”, 8” & 10” stroke pneumatic cylinders.
- 110 volt pneumatic directional control valve or 110 volt linear actuator (class II, group G)
- Mounting assembly to fit the bottom of an inclined spout or bin
- Pneumatic pressure regulator, pneumatic gauge
- Serial number tag and EMC approved safety/warning labels
- System control timer, on-off switch, signal lights, manual cycle pushbutton
A-310
The Gamet model A-310 sampler is ideal for use in quality control and bagging operations. Standard units are available with both 10” and 16” long sample tubes. Both mount and operate identically. This device can be used to sample grain, meal, powder, pellets, and other dry bulk aggregate materials up to 1/2” in diameter. Sample frequency is easily adjusted and can cycle 12 to 120 times per hour. Each stroke of the 10” sampler produces about 1/2 dry pint of product. The 16” unit will produce about 3/4 dry pint per cycle.
Features:
- 10” & 16” stroke pneumatic cylinders.
- 110 volt pneumatic directional control valve
- Mounting assembly to fit the bottom of an inclined spout or bin
- Pneumatic flow control valves
- Serial number tag and EMC approved safety/warning labels
- Fixed volume of sample collected per cycle
- Use on grain, meal and pellet products
Lab Dividers
The only GIPSA approved device of its kind, Gamet Rotary Dividers are fast and accurate to within 1/10th of 1% of the total sample by weight. Because you can reduce a sample by 90% in a single pass this divider can significantly reduce the length of time it takes one employee to handle and divide larger samples. The Laboratory Rotary Divider series eliminates the need to divide samples many times as with traditional gravity type dividers.
This series of divider is much quieter than its gravity style counterpart (Boerner Style). It is also a cleaner device to use because the dividing mechanism is completely enclosed in the precision made, cast aluminum housing. This rugged and durable product will provide many years of effective use and cost savings.
Features:
- 110 and 220 volt models
- Built to order for each customer
- 1/4 HP gear box drive
- On-off switch
- Power on light
- Sample catch containers
- Fused for power overload protection
Bulk Samplers Accessories
Gamet offers a complete line of accessory items to make your diverter type sampling system complete. These accessory items allow us to meet and exceed the requirements of the local governing agency.
Dividers
Download Brochure
Gamet manufactures a complete line of sample dividers for use in automatic sampling systems. These include motorized mechanical units that meet or exceed GIPSA, CGC or NOPA requirements to the economical gravity style units for those smaller flow rates. Surely there is a divider offering that will meet your requirements.
Pneumatic Conveying Systems
Download Brochure
Pneumatic conveying systems allow the sample to be collected at a point in the facility and conveyed to a lab or office area where the final inspection process will take place in a timely and efficient manner.
System Electric Control
All Gamet diverter style sampling systems are supplied with a pre-engineered electric control system. This system is supplied in a NEMA 12 (dust tight) enclosure and contains all switch gear to operate the entire system. These control systems can be supplied to integrate with your main control systems as needed.
Sample Collection Devices
Download Brochure
Gamet offers a variety of sample collection devices. These vary from our standard vented box style units to multi position collection systems that can be integrated to plant system controls. Sample collection devices vary in size depending on your specific needs. Our small glass door collector can hold up to 6,000 grams while the large glass door collector holds in excess of 30 pounds of sample. Multi position units come with a variety of container sizes to meet your requirements.
6400
Our end of conveyor type sampler, the 6400 series features true flexibility. It can be installed in belt, screw or drag conveyor applications. Our systems engineers can design the right installation for your needs. Systems are available for conveyors widths as small as 18″ and as wide as 108″.
Features:
- Flexible construction allows for a number of application solutions
- Simple chain drive mechanism requires very little maintenance
- Ideal for specialty sampling system installations
- Complete system controls supplied with all units
- System can be approved for official use per GIPSA, CGC and NOPA regulations
6800L
The largest of our spout sampler line, the 6800L is a proven workhorse. It’s simple drive mechanism and completely sealed construction make it suitable for most large volume applications. Just like the 6800S it can be mounted at any angle from 35 degrees of horizontal to vertical. It is an ideal solution for your rail load out application.
Features:
- Completely sealed construction
- Customers choice of urethane or ceramic tile lining materials
- Accessories available for complete system applications
- System electric controls supplied with all units
- System can be approved for official use per GIPSA, CGC and NOPA regulations
6800S
The smallest of our spout sampler line, the 6800S is a proven, rugged sampler that can be mounted at any angle from 35 degrees off of horizontal to vertical. It is ideal for those smaller flow rates requiring the most accurate sampling techniques available.
Features:
- Completely sealed construction
- Customers choice of urethane or ceramic tile lining materials
- System accessories available for complete system applications
- System electric controls supplied with all units
- System can be approved for official use per GIPSA, CGC and NOPA regulations
Truck Probe Accessories
Gamet offers a complete line of accessory items to make your truck probe sampling system complete. By adding components to your system you allow your operator to be more productive. Ticket conveying systems, excess grain return systems, long distance sample conveying systems, traffic control signal lights, intercom systems, CCTV and signal alarms are among the items that will speed up and automate your truck probe sampling system.
+Spare Parts & Emergency Kits
Download Brochure
Gamet carries almost every spare part and even emergency kits for use with your truck probe systems. It is recommended to have spare parts on hand, as time is an invaluable resource during busy times.
+Bridging & Support Structure Systems
Download Brochure
Long distance and overhead sample transportation is becoming increasingly popular and necessary. Gamet manufactures a modular pre-engineered support pole and bridge system. This system supports sample conveying tubing, electric control circuits, CCTV cameras, traffic lights, intercom systems and ticket conveying systems. The system is truly modular enabling you to utilize poles of various heights (up to 17’ high), bridges of various lengths (up to 24’ long) and a variety of system mounting brackets. All equipment is designed to bolt together and allows the user the flexibility to make a system that will suit their specific needs.
+Closed Circuit Monitoring Equipment
Download Brochure
The most popular system accessory is a Closed Circuit Television System. We provide a variety of systems to meet your needs. Our standard system features a 15″ LCD flat screen color monitor with day/night IR, all weather, camera, camera power transformer and connection cable as needed. Our standard system is capable of supporting up to 4 cameras. Other monitors and camera features are available upon request. We have the solution for your CCTV application.
+Traffic Direction Signals
Download Brochure
Our traffic control signal lights allow your operator to signal to drivers when to advance, when to stop and direct them to specific locations as needed. Our series of lights can be supplied in our standard red/green two light set or in any other configuration that you desire. Systems are available in a variety of colors with as many lights as are required. We can also supply the lights with labels/symbols to aid in directing traffic throughout your facility. Contact our sales staff to help you configure a system to meet your needs.
+Gravity Divider
Download Brochure
Choose from either a 50-50 or 5-1 ratio gravity divider that can be mounted directly below the discharge of the product collection box to split the sample for testing purposes. Unit is supplied with an 8 ½” diameter hopper and stands 23 ½” tall.
+Grain Return System
Download Brochure
Accumulated sample in your testing area is a problem. Gamet produces systems that enable your operator to return unused and unneeded sample back to a waiting truck or other vessel. These systems help with facility housekeeping and efficiency. Each system consists of an excess sample intake hopper, blower/air transportation system, tubing and fittings as needed and system controller with timer for system automation. This is an ideal addition to your truck probe sampling system.
+Audio Communication Tools
Download Brochure
Gamet can supply a wired 3M intercom system that enables your operators to communicate with truck drivers and other personnel. This system is supplied to support up to six channels from the master station in the office. Each system is supplied with an indoor master station, two way outdoor speaker horn and a traditional hand held operator. Additional outdoor system components are available if more than one outdoor communication point is desired. Flexible systems that help speed throughput at your facility.
+Ticket Conveying Systems
Download Brochure
A complete scale ticket return system that allows the exchange of documents between elevator personnel and truck drivers without having them leave their truck. This unit is supplied complete with an weather-proof outdoor receiving unit and tubing/fittings.
JT20
The model JT20 is the largest of the JaHam probes. It is ideal for processing plants & high volume grain elevator applications where daily dependability is a must. Its proven track record provides you the sampling confidence required in your daily operations.
Features:
- All hydraulic operation
- Ball bearings at major wear points
- Core style probe system
- Multiple vacuum system options
- 2 HP hydraulic pump drive system
- Standard handheld joystick operator
- Maximum 240° rotation
